System Maintenance Commands
05/29/03 5-11
SD - LOAD SITE DOWN TIME
Use the SD command to set a daily time when the site is automatically shut down and users
cannot access the fuel dispensing equipment. A **SITE IS DOWN** message appears on the
LCD display. You can still access other software features and can activate a pump for one
transaction through the AP command. Type the time entries using 24-hour military time.
1. At the
*
prompt, type SD. The system displays:
SITE SHUT DOWN START TIME:
HOURS:
2. Type the hour (0-23) for the start shutdown time and press RETURN. The system displays:
MINS:
3. Type the minutes (0-59) and press RETURN. The system displays:
SITE SHUT DOWN END TIME:
HOURS:
4. Type the hour (0-23) for the end shutdown time and press RETURN. The system displays:
MINS:
5. Type the minutes (0-59) and press RETURN. The
*
prompt reappears.
If you type the SD command when the auto site shutdown feature is disabled, this message
appears: AUTO SITE SHUT DOWN OPTION MUST BE ENABLED! Use the SC command to
enable this feature.
Example:
↵
↵
↵
↵
Comments to this Manuals