Gasboy 1000 Series FMS Operation Manual User Manual Page 133
- Page / 241
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
05/29/03 16-1
Section 16
GATE CONTROLLER OPTION
DESCRIPTION
The Gate Controller option enables you to control access to a gate using your Series 1000.
Separate Series 1000 units are required to activate gates and pumps. When you insert your
card(s), the gate controller verifies the card and activates the gate relay.
On a dual card system, access is granted after verification of the single card containing the card
number field. Field separators that occupy account data positions on dual card systems are
converted to zeros for printout purposes.
If you have the Gate Controller option, follow these steps:
1. Position your vehicle in front of the gate to be accessed.
2. On the Series 1000, the LCD alternates between ENTER CARD and a personalized system
message. Insert your card fully into the Series 1000 card reader with the magnetic stripe
facing down and to the left. The LCD displays: REMOVE CARD.
3. Remove the card from the card reader. If you leave a card in the reader for more than five
seconds, an alarm sounds to remind you to remove it.
4. Remove the card from the reader. If you are required to enter a Personal Identification
Number (PIN), the LCD displays: ENTER P.I.N.
Using the keypad, enter your PIN number and press ENTER. To ensure security, an asterisk
(*) appears for each digit you press. If you make a mistake while entering your PIN, press
CLR (clear) and enter it again.
You have three tries to enter the correct PIN. After the third unsuccessful try, the display
returns to ENTER CARD and you must start again at Step 2.
If your system uses the Auto Pin Lockout feature, the card is automatically locked out after
the third unsuccessful PIN entry.
5. When the card and optional PIN are verified, the Series 1000 activates the gate relay and the
LCD shows GATE ACTIVATED. This message remains until the Series 1000 deactivates
the gate controller relay.
Gate Controller Commands
The Gate Controller Option commands allow you to:.
● LG load gate timeout
● PG print gate timeout
● AG activate gate from terminal
- GASBOY INTERNATIONAL LLC 1
- Software Version 10 3
- CONTENTS 5
- OPTIONAL FEATURES 7
- FIGURES AND TABLES 11
- INTRODUCTION 13
- SYSTEM FEATURES 14
- HOW TO USE THIS BOOK 18
- Section 2 19
- Section 3 21
- COMMUNICATION TERMINATIONS 22
- INITIATING COMMUNICATION 23
- LS - LOAD SIGN-ON PASSWORD 24
- LOST OR FORGOTTEN PASSWORD 25
- Section 4 27
- HE - HELP COMMAND 30
- Section 5 33
- ● Number of lines per page 35
- ● Card expiration date 35
- ● Auto PIN lockout 35
- ● Auto site shut down 35
- 05/29/03 5-7 39
- LD - LOAD DATE AND TIME 41
- PD - PRINT DATE AND TIME 42
- SD - LOAD SITE DOWN TIME 43
- VA - VALIDATE ALL CARDS 50
- IA - INVALIDATE ALL CARDS 53
- CC - CHECK CARD VALIDATION 56
- PV - PRINT VALID CARD LIST 57
- PI - PRINT INVALID CARD LIST 58
- TANK INVENTORY COMMANDS 61
- LI - LOAD TANK INVENTORY 62
- AI - ADD TO TANK INVENTORY 63
- TI - PRINT TANK INVENTORY 65
- PUMP COMMANDS 67
- LP - LOAD PUMP DATA 68
- PP - PRINT PUMP DATA 71
- EP - ENABLE A PUMP 72
- DP - DISABLE A PUMP 73
- AP - ACTIVATE A PUMP 75
- IP - INACTIVATE A PUMP 76
- ZP - ZERO PUMP TOTALIZERS 77
- TRANSACTION COMMANDS 79
- RT - RESET TRANSACTION FILE 88
- LN - LOAD TRANSACTION NUMBER 90
- TRANSACTION MESSAGES 92
- Section 10 95
- LL - LOAD FUEL LIMITATIONS 98
- PL - PRINT FUEL LIMITATIONS 99
- Section 11 101
- ● PP to obtain pump totals 102
- Section 12 105
- ENTRIES 107
- ● Hours-Per-Liter Option 108
- DUAL LOCKOUT OPTION 111
- FUEL ALLOCATION OPTION 113
- FUEL ALLOCATION EXAMPLES 114
- AO - ALLOCATION OFFSET 115
- LA - LOAD ALLOCATION 116
- AA - ADD TO ALLOCATION 118
- CA - CHECK ALLOCATION 122
- PA - PRINT ALLOCATION TABLE 125
- Section 15 129
- FUEL DELIVERIES 130
- DIPSTICK READINGS 131
- GATE CONTROLLER OPTION 133
- LG - LOAD GATE TIMEOUT 134
- PG - PRINT GATE TIMEOUT 135
- AG - ACTIVATE GATE 136
- CHANGES IN STANDARD COMMANDS 138
- LOADABLE BASE PUMP OPTION 143
- MANUAL KEYPAD ENTRY OPTION 147
- LITERS-PER-100KM OPTION 149
- CV - CLEAR VEHICLE FILE 151
- GASBOY Series 1000 154
- 19-6 05/29/03 154
- Example for LPH: 154
- RV - REMOVE A VEHICLE RECORD 155
- LO - LOAD ODOMETER/HOURS 156
- IV - INITIALIZE VEHICLE FILE 157
- VF - PRINT VEHICLE FILE 158
- CR - CHECK VEHICLE RECORD 162
- TRANSACTION PROCESSING 165
- TRANSACTION HEADINGS 168
- 19-22 05/29/03 170
- Example: PS Command: 170
- L/100 KM (OR LPH) MESSAGES 171
- Section 20 173
- PUMP SWITCH TIMER OPTION 177
- REASONABLE ODOMETER/HOURS 181
- CHECK OPTION 181
- LV - LOAD A VEHICLE RECORD 184
- 05/29/03 22-11 191
- Example: PS Command 191
- ODOMETER/HOURS CHECK 192
- RECEIPT PRINTER OPTION 193
- FUELING PROCEDURE 194
- GR - GET RECEIPT COMMAND 195
- RECEIPT PRINTER MESSAGES 200
- SUPERVISOR CARD OPTION 201
- TANK MONITOR INTERFACE 205
- ● ENQ (CTRL E) termination 207
- ● Timeout termination 207
- TANK MONITOR ERROR MESSAGES 209
- PREVENTIVE MAINTENANCE 211
- Section 27 213
- SWITCHES AND SETTINGS 214
- CHANGING THE PAPER 216
- CHANGING THE RIBBON 217
- ADJUSTING CUTTER BLADES 219
- Appendix A 221
- AUTO PIN LOCKOUT 223
- LK - LOAD PIN KEY 223
- LC - PRINT LAST CARD(S) READ 223
- CARD VALIDATION COMMANDS 224
- PT - PRINT TRANSACTIONS 224
- PH, PC COMMANDS 225
- FUELING RESTRICTION COMMANDS 225
- Appendix B 229
- OKIDATA 184 SETUP 231
- 05/29/03 Index-1 233
- Index-2 05/29/03 234
- Index 235
- 05/29/03 Index-3 235
- Index-4 05/29/03 236
- 05/29/03 Index-5 237
- Index-6 05/29/03 238
- 05/29/03 Index-7 239
- WARRANTY 241
Related products and manuals for Hardware Gasboy 1000 Series FMS Operation Manual
Hardware Gasboy MCE300 User Manual
(71 pages)
(71 pages)
Hardware Gasboy 4-Hose PCU User Manual
(2 pages)
(2 pages)
Hardware Gasboy CFN Series User Manual
(42 pages)
(42 pages)
Hardware Gasboy KE200 User Manual
(119 pages)
(119 pages)
© 2020, manymanuals.com. All rights reserved. | 2.587 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals