Gasboy 03908X User Manual download pdf (Page 19)

MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006 Page 19

Installation

12 In the kit, locate the 460A4 Circuit Board Assembly (see Figure 1 for identity). Connect the

assembly to the jack labeled LCD Display on the 9800 CPU PCB.

13 Reconnect the connector removed in Step 11 to the 460A4 Circuit Board Assembly jack J1 (in

center of board).

Figure 16: C06392 9800 CPU Printed Circuit Board (Photograph)

Figure 17: C06392 9800 CPU Printed Circuit Board (Drawing)

14

In the kit, locate the two W284 Pulser/Handle Ribbon Cables (see Figure 1 for identity).

15 Connect one end of one W284 cable to P1 on the 461A2 board (Figure 18) and the other end to

P2 in the LP-70 Polycase box (Figure 19).

Pulser 1 and

Handles Jacks

Pulser 2 Jack

LCD

Display

Jack

Pulser 1 and

Handles Jacks

Pulser 2 Jack

LCD

Display

Jack

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments