Gasboy 03908X User Manual download pdf (Page 20)

Installation

Page 20 MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006

16 Connect one end of the second W284 cable to P8 on the 461A2 board (Figure 18) and the

other end to P3 in the LP-70 Polycase box (Figure 19).

Note: Be sure the cables are connected to the connectors as follows:

P1 of 461A2 to P2 of LP-70 Polycase box

P8 of 461A2 to P3 of LP-70 Polycase box

Figure 18: 461A2 Circuit Board in Place with Connections Made

Figure 19: LP-70 Polycase Box Showing Connections

In the kit, locate the W283 Display Adapter harness (see Figure 1 for identification).

18 Connect one connector on the harness (both are the same) to J4 on the 460A4 Circuit Board

Assembly (Figure 20) and the other connector to P6/P7 in the LP-70 Polycase box (Figure 19).

461A2 PCB

P6/P7

DIP

Switches

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Gasboy 03908X User Manual Page 20