Gasboy Site Controller II CPU User Manual download pdf (Page 20)

Upgrading POS Software Upgrade

Page 16 MDE-4504 Site Controller II CPU/Memory Board/Program Upgrade Instructions · August 2005

POS Software Upgrade

Note: For more details on this procedure, refer to MDE-4356 - Profit Point Reference

Manual.

1 Before performing an upgrade, back up the data in the POS. You will need 3 formatted

diskettes. If you need to format the diskettes, begin at Step 2. If you already have formatted

diskettes begin at Step 2, but skip Steps 4–8.

2 Press CLEAR MENU and SPECIAL FUNCTION. The Special Function Menu appears.

3 Press 0 Exit to main menu and press ENTER.

4 Press 3 Utility and press ENTER.

5 Press 4 Format a diskette and press ENTER. The Format Diskette Submenu appears.

6 Choose the type of diskette you would like to format. Press 1 for 720K bytes or press 2 for

1.44Mbytes, and press ENTER. The screen prompts you to place the disk in drive A:.

7 After placing the disk in drive A, press ENTER. When the screen prompts you for a volume

label, press ENTER. The display prompts you if you wish to format another diskette.

8 Press Y until all diskettes are formatted, then press N. This returns you to the format diskette

submenu.

9 Press 0 Return to utility menu and press ENTER.

10 Press 0 Return to main menu and press ENTER.

11 Press 6 Backup files to diskette and press ENTER.

12 Press 2 Data and configuration files and press ENTER. The screen prompts you to put a

back-up or blank diskette into drive A: and press any key.

13 Put one of the formatted diskettes in drive A: and press ENTER. The screen prompts you that

this is not a back-up disk and would you like to start a new one?.

14 Press Y. When the back-up process is complete, press any key to return to the Back-up menu.

Ensure that you label the back-up diskettes Data and configuration files with the current date.

15 Press 0 Return to main menu and press ENTER.

16 Press 3 Utility and press ENTER.

17 Press 9 Installation menu and press ENTER. The screen prompts you to place the

Installation disk in drive A:.

18 Place the Installation disk in drive A:, and press ENTER. The screen prompts you to confirm

the date and time.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Gasboy Site Controller II CPU User Manual Page 20