Gasboy Fuel Point Dispenser User Manual

DISPENSER AND HOSE RETROFIT INSTALLATION MANUAL C35593 GASBOY INTERNATIONAL LLC

GASBOY Fuel Point System 1-4 03/28/03 COMPONENT OVERVIEW As you read the following descriptions, refer to the drawing at the right for an overall

03/28/03 2-1 Section 2 GETTING STARTED GENERAL INFORMATION The following procedures assume the dispenser to be modified is UL-Listed and has

GASBOY Fuel Point System 2-2 03/28/03 BEFORE YOU BEGIN CAUTION: Assembly and installation of required components may require drilling and/or seal

Getting Started 03/28/03 2-3 DISPENSER RETROFIT J-BOX ASSEMBLIES For Fuel Point, each pump or dispenser will require at least one J-Box/Amplifier

GASBOY Fuel Point System 2-4 03/28/03 FUEL POINT HOSE RETROFIT KITS Retrofit Kits include Fuel Point specific parts required to modify existing pu

Getting Started 1065 2-5 Kit Contents 1 012116 Nozzle Cover, 3/4” 012113 Nozzle Cover, 1” 2 C07279 N-Ring Assembly 3 012181 Breakaway C

GASBOY Fuel Point System 2-6 03/28/03 Kit Contents (Continued) 8 Short Hose Wire, Qty. 1 C07341 Wire Assy., 3/4" dia. x 1’ whip hose C0734

Getting Started 1065 2-7 INTERNAL WIRE RETROFIT COMPONENTS Internal Wire Small Parts Kit, C07348 1 C35972 Fitting, Hose Wire, Qty. 1 2 048

GASBOY Fuel Point System 2-8 03/28/03 USING THIS MANUAL The remainder of this manual contains procedures for assembling your antenna and hose. Th

03/28/03 3-1 Section 3 STANDARD INTERNAL WIRE HOSE RETROFIT STEP A: DISASSEMBLE HOSE 1. Turn off pump power. 2. Remove hose assembly at t

GASBOY Fuel Point System 3-2 03/28/03 STEP B: CONSTRUCT HOSE ASSEMBLIES (INTERNAL WIRE) HOSE #1 ASSEMBLY (Nozzle End) NOTE: All pipe threads must

Standard Hose Retrofit 9182 3-3 STEP B (CONT’D): CONSTRUCT HOSE ASSEMBLIES Hose #2 Assembly (Nearest Pump) 7. Continuing at the breakaway, locat

GASBOY Fuel Point System 3-4 03/28/03 STEP C: FINAL HOSE AND NOZZLE ASSEMBLY 1. Assemble Breakaway and Nozzle: Determine fuel flow direction and

Standard Hose Retrofit 9182 3-5 STEP D : REASSEMBLE Hose to Pump 1. Install the J-Box/amplifier: Unless installed previously, remove the cover

GASBOY Fuel Point System 3-6 03/28/03 STEP E: COMPLETE N-RING WIRING 1. At the J-Box, cut the pump wire to about a 15" length and remove 2&q

03/28/03 4-1 Section 4 VAPOR RECOVERY RETROFIT KITS Fuel point Vapor Recovery Kits are available in several styles for most common application

GASBOY Fuel Point System 4-2 03/28/03 VAPOR RECOVERY SMALL PARTS KIT, C07389

Vapor Recovery Retrofit Kits 03/28/03 4-3 STEP A: CONSTRUCT VAPOR RECOVERY HOSE ASSEMBLIES Hose 1 Assembly (Pump End) 1. Balanced hose assemblie

GASBOY Fuel Point System 4-4 03/28/03 STEP B: NOZZLE ASSEMBLY 1. See Vapor Recovery Nozzle list (Section 2) for nozzles approved by UL for use wi

Vapor Recovery Retrofit Kits 03/28/03 4-5 STEP C: FINAL VAPOR RECOVERY HOSE ASSEMBLY 1. Assemble Breakaway and Nozzle: Determine fuel flow direc

 FUEL POINT DISPENSER AND HOSE RETROFIT INSTALLATION MANUAL C35593 REV. 03/28/03 INSTALLERS - IMPORTANT In addition to installatio

GASBOY Fuel Point System 4-6 03/28/03 STEP D: REASSEMBLE HOSE TO PUMP 1. Install the J-Box/Amplifier: Unless installed previously, remove the cov

Vapor Recovery Retrofit Kits 03/28/03 4-7 STEP E: COMPLETE N-RING WIRING 1. At the J-Box, cut the pump wire to about a 15" length and remove

GW01 - 6/04/02 Rev. 1 WARRANTY General Statements: Gasboy International LLC. warrants all new equipment manufactured by Gasboy against defective ma

035282 Rev. 1267 GASBOY INTERNATIONAL LLC. 707 North Valley Forge Rd. Lansdale, PA, 19446 ● (215) 855-4631 ● FAX: (215) 855-0341 IMPORTANT WAR

03/28/03 Contents-1 CONTENTS Section 1: INTRODUCTION Purpose...

03/28/03 1-1 Section 1 INTRODUCTION PURPOSE The GASBOY Fuel Point Dispenser and Hose Retrofit Installation Manual is provided to assist you in

GASBOY Fuel Point System 1-2 03/28/03 FUELING SEQUENCE Fueling a vehicle with a Fuel Point Vehicle Module (VM) is accomplished as follows: 1. In

Introduction 1065 1-3 TESTING THE FUEL POINT INSTALLATION The following test procedures are helpful: • If the system is set up for use with card