Gasboy Battery Heater Kits User Manual download pdf (Page 6)

Installing the Atlas Battery Heater Kit

7300 West Friendly Avenue • Post Office Box 22087

Greensboro, North Carolina 27420

Phone 1-800-444-5529 • http://www.gasboy.com • Printed in the U.S.A.

MDE-4555 Atlas™ Battery Heater Kits (M06897K00X) Installation Instructions · March 2006

Atlas

™

is a registered trademark of Gasboy. Phillips

is a registered trademark of Phillips Screw Company.

5 Secure the thermostat to the standoffs using 6-32 screws.

Cover Plate

Thermostat

6 Remove the adhesive backing from the heater strip. Press the heater strip to the upper barrier

plate. Install the flat washers, place the heater cover plate, and secure it with two M4 screws.

You may have to move the pulser to do this.

7 Connect the heater cable to the power bracket connector labeled HEATER.

Heater power

bracket connector

Completing the Installation

1 Reassemble pump (fasten display panel in place, install and secure the bezel assembly, and

install and lock the front panel).

2 Inform the manager/owner that the circuit breakers for MICRO, LIGHTS and FEED will be

turned on and then turn them on.

3 Remove the lockout/tagout and return to normal operation.

M05063B001 Heater Cover Plate

Q12083-13 Screw, 6-32 X 3/8” with lockwasher

M00417B224 Screw, M4 X 8

Part Number Description

1 2 3 4 5 6

No comments

Gasboy Battery Heater Kits User Manual Page 6